青島FAG軸承中2218K軸承的規(guī)格和參數：

 

　　Specifications and parameters of 2218K bearing in Qingdao FAG bearing:

 

　　軸承型號：FAG2218K軸承（Bearing model: FAG2218K bearing）

 

　　內徑：90（Internal diameter: 90）

 

　　外徑：160（Outer diameter: 160）

 

　　厚度：40（Thickness: 40）

 

　　新型號：2218K（New model: 2218K）

 

　　舊型號：111518（Old model: 111518）

 

　　品牌：FAG軸承（Brand: FAG bearing）

 

　　類型：SKF調心球軸承（Type: center ball bearing）

 

　　備注：圓錐孔調心球軸承（10000 K型）（Note: cone bore ball bearing (10000 K)

 

　　FAG2218K調心球軸承產品特性（FAG2218K core ball bearing product characteristics:）：

 

　　主要承受徑向載荷，同時可承受較小軸向載荷。軸（外殼）的軸向位移限制在游隙限度內，具有自動調心性能，允許內、外圍相對傾斜不大的條件下正常工作，適用于支承座孔不能嚴格保證同軸度的部件中。

 

　　It is mainly subjected to radial load while bearing small axial load. The axial displacement of the shaft (shell) is limited to the limit of the clearance, and it has automatic heart control performance, allowing the inner and periphery to work normally under the condition of relatively incline relative incline. It is applicable to the parts of the supporting seat hole which can not strictly guarantee the coaxiality.

 

　　FAG2218K調心球軸承日常維護（FAG2218K center ball bearing daily maintenance:）：

 

　　帶防塵蓋和帶密封圈的調心球軸承裝配時已填入適量的潤滑脂，安裝前不應加熱也不必清洗，使用過程中不需再潤滑，適應運行溫度—— 30 ℃ 至+ 120 ℃ 之間。調心球軸承主要用途： 適用于精密儀表、低噪音電機、汽車、摩托車及一般機械等，是機械工業(yè)中使用非常為廣泛的一類軸承。

 

　　The ball bearing ball bearing with dust cover and sealing ring has been filled with a proper amount of grease. It should not be heated before installation and no need to be cleaned before installation. It does not need to be lubricated in the process of use, and is suitable for running temperature between 30 and 120. The main purpose of the ball bearing is: it is suitable for precision instrument, low noise motor, automobile, motorcycle and general machinery. It is a very wide type of bearing used in the machinery industry.