簡單辨別SKF進口軸承的真假：

 

　　Simply distinguish the true and false of SKF imported bearings.

 

　　1．結果看軸承的外包裝盒，通常的包裝盒為白字、藍底、下有赤色條。但近兩年的產物有花盒，圖案為多少個SKF牌號。

 

　　1. the results show that the outer packing box of the bearing is usually white, blue and red. But in the past two years, there are flower boxes and SKF patterns.

 

　　2．看進口軸承的生產日期，假若從側面打開軸承的包裝盒，盒上有生產日期及日期代碼。

 

　　2. Look at the production date of the bearing. If you open the packing box of the bearing from the side, the box has the production date and date code.

 

　　3.2000年后生產的進口軸承，其包裝盒上有條形碼。

 

　　After 2000, the production of bearings has a bar code on its package.

 

　　4．看進口軸承型號，進口軸承型號有后綴字母A、B、C、D、E等，這些字母分別代表差異的生產年份，具體資料見附表。

 

　　4. Look at the type of bearing, the type of bearing has the suffix letter A, B, C, D, E and so on, these letters represent the different production years, the specific information is shown in the attached table.

 

　　5．注意牌號上的SKF字體，S為上窄下寬，K和F的左邊豎畫上有凹坑。

 

　　5. pay attention to the SKF font on the brand, S for the upper and lower width, and K and F on the left side of the vertical picture with pits.

 

　　6．看鋼印，SKF進口軸承上標明型號、產地的字母有酸洗和激光加工兩種。用手摸時較為平滑，假進口軸承的字體通常是刻上去的。

 

　　6. look at the steel stamp. The SKF bearing is marked with the type and the origin letter has two kinds of pickling and laser processing. The handle is smooth when the hand is touched, and the font of the false bearing is usually carved.

 

　　7．看產地，球軸承產地：馬來西亞、意大利、法國、美國（美國產進口軸承通常只在美邦本土應用）；短圓柱軸承產地：德國；角接觸球軸承產地：奧地利；球面滾子軸承產地：馬來西亞（通常為小型2315、2316、2318）、瑞典（大型號）、德國（大型號）；滾針軸承產地：德國。

 

　　7. Look at the origin of ball bearings: Malaysia, Italy, France, the United States (U.S. bearings are usually only used in the United States); short cylindrical bearings: Germany; angular contact ball bearings: Austria; spherical roller bearings: Malaysia (usually small 2315, 2316, 2318), Sweden (large). No.), Germany (large size), needle roller bearings: Germany.

 

　　8．進口軸承開包后，大軸承通常為密封塑料袋，小軸承為塑料包裝紙。軸承上有一層油脂，真進口軸承外游歷明，無銹蝕和點蝕。

 

　　8. after the bearing is opened, large bearings are usually sealed plastic bags, and small bearings are plastic wrapping paper. There is a layer of grease on the bearing. There is no rust and pitting on the true bearing.

 

　　生產廠地 生產國度 生產類別

 

　　Production site production country production category

 

　　11 瑞典 1.3 ——調心球軸承 調心滾子軸承

 

　　11 Sweden 1.3 - self aligning ball bearing roller bearing

 

　　15 英國 3 ——調心滾子軸承

 

　　15 Britain 3 - spherical roller bearings

 

　　15 大不列顛 3 ——調心滾子軸承

 

　　15 great Britain 3 - spherical roller bearings

 

　　18 德國 7.2 ——圓柱滾子軸承圓錐滾子軸承

 

　　18 Germany 7.2 - cylindrical roller bearings tapered roller bearings

 

　　21 法國 0 ——深溝球軸承

 

　　21 France 0 - deep groove ball bearings

 

　　23 奧地利 6—— 角接觸球軸承

 

　　23 Austria 6 angle contact ball bearing

 

　　28 澳大利亞—— 角接觸球軸承

 

　　28 Australia - angular contact ball bearings

 

　　29 意大利 0.8.6—— 角接觸球軸承、推力軸承 球面軸承

 

　　29 Italy 0.8.6 angular contact ball bearings and thrust bearings spherical bearings.

 

　　56 馬來西亞 0.3 ——深溝球軸承 調心滾子軸承

 

　　56 Malaysia 0.3 - deep groove ball bearing self-aligning roller bearing

 

　　72 USA 6—— 角接觸球軸承

 

　　72 USA 6 - angular contact ball bearings

 

　　有了以上的進口軸承知識自己可以從表面上分別出來，如果還不行只有找他們的代理商，最好的辦法是直接找代理商購買。

 

　　With the above bearing knowledge they can be separated from the surface, if not only to find their agents, the best way is to find agents directly to buy.